Quickguide_digital_Frame-Nation_UK

General user manual Windows, outward opening Windows supplied with an espagnolette are oper- ated with a single handle placed on the sash. The espag has adjustable mushroom bolts that locks into the keeps securing the window in a closed position. This helps to prevent forced entry. The mushroom bolt can be adjusted as needed to ensure the sash has a tight seal against the frame. The keep has two positions. The first position is for closing the window normally, the second allows for ventilation providing an opening of 10 / 20mm. Windows and terrace doors with friction brakes allows the sash to be held in any position while open. The friction can be adjusted by tightening or loosening the friction screw on the glider on the aluminium gliding track. The position cannot be locked in place - if this functionality is want- ed, a handle operated brake must be selected (standard on outward opening terrace doors). The handle operated brake is activated by turning the handle to a closed position, while the window is open. The sash must be slightly open before the brake can be activated. Reversible ironmongery is equipped with an opening restrictor that prevents the window from being opened more than about 100 mm. The restriction can be over- ridden by pressing the black safety lock before fully opening the window. The restrictor will auto- matically re-engange when the window is flipped about 170° - allowing cleaning from the inside. Windows, inward opening Tilt position gives an opening of approx. 20 mm. If the turn function is used for ventilation, the frame should be secured against wind. When switching between functions, the frame is pushed into place before turning the handle. Turn or turn/tilt ele- ments may have handle operated brakes. The brake is activated by turning the handle down. If the bracket has malfunctioned, the handle is turned to horizontal and the hinge side of the sash pressed into the frame. By activating the frame lifter, the handle can be raised vertically. The win- dow is then closed and the handle is turned to the closed position. The bracket is now back in its ba- sic position. Doors As standard front doors are supplied with espag- nolette with minimum three locking points. The espag has a lock box half way up the sash, hook bolts, mushroom bolts and safety keeps at the top and bottom. The lock box itself has a latch, solid hook bolt and a height adjustable keep. When the handle is activated, all the locking points are released and the door can be opened. The locking points are activated by lifting the han- dle up, after which the door can be locked with the key. Maintenance General cleaning and lubrication of all ironmon- gery parts as required and at least once a year. In coastal areas, perform maintenance at least twice a year. See more details in the installation app or on install.idealcombi.com Detailed user manual can be found on idealcombi.com/brochures Receipt and storage According to the DVV installation requirements it is the contractor installing the windows and doors that is responsible for complying with the installation guidelines set out by both DVV and Idealcombi. Claims or service requests that is caused by faulty installation or maintenance are not covered by guarantee. When unloading and handling the elements, use tools and methods which do not damage the elements or endanger anyone working on-site. Upon receipt, the buyer must check that the consignment complies with the agree- ment and that the elements are free from apparent defects, faults or transportation damage. If any issues are discovered upon delivery please contact Idealcombi’s Service Department on tel. 01582 860 940 before installing the elements. A fitted element is considered an accepted element unless otherwise agreed in writing with Idealcombi’s service department. Stickers and cork chips on window glass and other protective packaging must only be removed just before installing the elements. If stored outdoors, the elements must be placed on battens or pallets to keep them clear of the ground. The elements must be covered with a suitable and secure material to protect them from precipitation and dirt. Allow for sufficient ventilation around the elements in order to reduce the risk of con- densation forming underneath the covering and excessive heat building up due to direct sunlight. Individual window elements should be stored under a roof structure, in a container or preferably inside. Our doors and windows are supplied with a small tin of paint in the colour of the internal timber. This paint is for the fitter in case of minor damage during installation. Idealcombi’s Service Department is always willing to offer help and advice on surface treatment maintenance and on where to buy additional paint in a particular colour. To ensure optimal function and operation, windows and doors must be installed cor- rectly. Incorrect installation can result in faulty windows and doors. Damage to prod- ucts installed incorrectly will not be covered by the warranty. You are always welcome to contact our ser- vice team if you have any concerns regarding installation. You can reach the service team on tel: 01582 860 940. Grebsbetjentbremse Handleoperatedbrakestay 0-18 o Betjeningsområde forbremse Areaofoperation forbrake 19-89 o ✓ IC26